3.4.0 Matrix Server Command Reference

Chapter 1: PolyServe Matrix Server Commands 38
Copyright © 1999-2006 PolyServe, Inc. All rights reserved.
sandiskinfo.exe – show disk information
Synopsis
bin\sandiskinfo [-i|-u|-v] [-al]
Description
The sandiskinfo command can display information for both imported and
unimported SAN disks. Under normal operations, the sandiskinfo output
should be the same on all servers in the matrix. With no options, sandiskinfo
shows the UID, vendor, model, and capacity of each imported disk and
specifies the FC switch used to access the disk.
sandiskinfo
Disk: \\.\Global\psd2
Uid: 20:00:00:04:cf:13:38:3a::0 SAN info: fcswitch5:7
Vendor: SEAGATE Capacity: 34733M
The default is -i, which produces the output shown earlier for imported disks.
The -u option produces the same output for unimported disks.
The -a option also lists the partitions on each disk. When combined with -u, it
displays partition information for unimported disks.
sandiskinfo -a
Disk: \\.\Global\psd1 (Membership Disk)
Uid: 20:00:00:04:cf:13:38:18::0 SAN info: fcswitch5:7
Vendor: SEAGATE Capacity: 34733M
partition 01: size 16M type (PSMP/Active)
partition 02: size 9398M type (PSMP/Inactive)
partition 03: size 16M type (PSMP/Inactive)
partition 04: size 9421M type
partition 05: size 16M type
partition 06: size 9421M type (PSFS Filesystem)
partition 07: size 1028M type
partition 08: size 1028M type (unknown)
Disk: \\.\Global\psd2
Uid: 20:00:00:04:cf:13:38:3a::0 SAN info: fcswitch5:7
Vendor: SEAGATE Capacity: 34733M
partition 01: size 9M type (PSMP/Active)
partition 02: size 097M type (PSFS Filesystem)
partition 03: size 97M type (PSFS Filesystem)
partition 04: size 9220M type (unknown)