3.4.0 Matrix Server Command Reference

Chapter 1: PolyServe Matrix Server Commands 23

psdcoinst.exe – enable or remove the psd process

Synopsis

bin\psdcoinst -install|-uninstall

Description

The psdcoinst command enables or removes the psd process. The -install

option enables the process; the -uninstall option removes the process. The

server must be rebooted for the change to take effect.

psdctl.exe – display device bindings

Synopsis

bin\psdctl

Description

This command should be run only at the request of PolyServe personnel.

psfscheck.exe – check or repair a filesystem

Synopsis

bin\psfscheck [options] device

Description

The psfscheck utility looks for a PSFS filesystem on a device, replays

transactions that are to be replayed, and either checks or repairs the

filesystem. This utility can also be used to enable or disable Full Zone Bit

Maps (FZBMs), to enable sparse files, to enable or disable quotas, and to set

quota options for a filesystem. Before running psfscheck, be sure that the

volume is not in use.

The device can be specified in several ways:

• By the drive letter, such as X:

• By the mount point (junction), such as C:\san\vol2

• By the psd or psv name, such as psd2p2 or psv3