3.4.0 Matrix Server Command Reference

Chapter 1: PolyServe Matrix Server Commands 21
Copyright © 1999-2006 PolyServe, Inc. All rights reserved.
partresize.exe – grow a partition
Synopsis
bin\partresize
Description
The PolyServe Management Console includes an option to increase the size of
a PSFS filesystem and the partition on which it is located. When this option is
used, PolyServe Matrix Server runs the partresize command to increase the
size of the partition. This command is not intended to be run directly.
pathfilter.exe – translate the install path
Synopsis
tools\pathfilter
Description
This command is used by the PolyServe Matrix Server install process and
should never be run directly.
PSANcfg.exe – control port operations
Synopsis
bin\PSANcfg [-hu] [-[lL] <Port WWN>] [switch ...]
Description
The PSANcfg command can be used to add or remove local HBA port
information in the PolyServe Matrix Server configuration and to unfence
ports on FibreChannel switches.
The options are:
-l, -L
The -l command adds the specified HBA port to the list of local ports; the
-L command removes the specified port. The mxsanconf command
invokes PSANcfg with these options; they should not be run directly.
-u switch ...
Unfence all local ports on the specified FC switches.