3.4.0 Matrix Server Administration Guide

Chapter 7: Configure PSFS Filesystems 78
Copyright © 1999-2006 PolyServe, Inc. All rights reserved.
Available Volumes: This part of the window lists the basic or dynamic
volumes that are currently unused. Select one of these volumes for the
filesystem.
NOTE: The Create a Filesystem window identifies volumes by their
Matrix Server names such as psd1p2. To match these names to
their local Windows names, open the Disk Info window (select the
server on the Servers tab, right-click, and then select View Local
Disk Info).
Filesystem Options
Click the Options button to see the Filesystem Options window, which
lists the available options for the filesystem.
The General tab allows you to set the block size (either 4 or 8 KB).
The Quotas tab allows you to specify whether disk quotas should be
enabled on the filesystem. You can enable or disable quotas on a
filesystem at any time. (See “Enable or Disable Quotas” on page 97.)
When you enable quotas, you can also set default hard and soft quotas
and select other quota parameters.
To enable quotas on the filesystem, check the “Enable quotas” checkbox.