3.4.0 Matrix Server Administration Guide

Chapter 5: Configure the SAN 55

To determine the uuid for a disk, run the following command, which

prints the uuid, the size, and a vendor string for each unimported SAN

disk.

mx disk status

You can also use the Disk Info window to import a disk.

Deport SAN Disks

Deporting a disk removes it from matrix control. You cannot deport a

disk that contains a membership partition.

To deport a disk from the PolyServe Management Console, select Storage

> Disk > Deport or click the Deport icon on the toolbar. The Deport Disks

window, which appears next, lists all SAN disks that have been imported

into the matrix. Select the disks that you want to deport from this

window.

To deport a disk from the command line, use the following command:

mx disk deport <uuid> ...

To determine the uuid for the disk, use the mx disk status --imported

command.

You can also use the Disk Info window to deport a disk.