3.4.0 Matrix Server Administration Guide

Error and Event Log Messages

When certain errors occur, Matrix Server writes messages to the

PolyServe Management Console. Other error messages are written to the

Matrix Server event log.

Management Console Alert Messages

NN.NN.NN.NN has lost a significant portion of its SAN

access, possibly due to a SAN hardware failure

The specified server is unable to write to any of the membership

partitions. Ensure that the server can access the membership partitions

and also has write access to them. Also check for hardware problems that

can limit access to the partitions. If the disks containing the membership

partitions have failed, you will need to recreate the partitions. (See

“Manage Membership Partitions with mprepair” on page 193 for more

information.)

NN.NN.NN.NN is unresponsive and must be rebooted ASAP.

Until this reboot is done, some or all filesystem operations

may be paused throughout the matrix.

The specified server did not respond to a critical request. This problem

may be caused by a severe overload or resource shortage on the server.

Rebooting the server should clear the problem.