3.4.0 Matrix Server Administration Guide

Chapter 17: SAN Maintenance 197
Copyright © 1999-2006 PolyServe, Inc. All rights reserved.
The output shows the local membership partition list on the server where
you are running mprepair. It then compares this list with the lists located
on the disks containing the membership partitions. The output also
includes the device database records for the disks containing the
membership partitions. Following is an example.
###################################################################
Local membership partition list:
-------------------------------------------------------------------
Membership partition list --
UID/Part:20:00:00:04:cf:13:33:12::0/1 Local Path:\\.\Global\psd1p1
Status:OK (active) Size:8001Kb
These membership partitions contain a membership partition list
which matches the local membership partition file list:
UID/Part:20:00:00:04:cf:13:33:12::0/1
###################################################################
Contents of UID/Part:20:00:00:04:cf:13:33:12::0/1 --
Disk records:
Recid 1: 20:00:00:04:cf:13:33:12::0 psd1
Recid 258: 20:00:00:04:cf:13:3c:92::0 psd2
Host registry entries:
Host ID: 10.10.30.4 fencestatus=0
SAN Loc:10:00:00:00:c9:2d:27:7d::0 idstatus=0 (switch=fcswitch5)
Host ID: 10.10.30.3 fencestatus=0
SAN Loc:10:00:00:00:c9:2d:27:78::0 idstatus=0 (switch=fcswitch5)
Search the SAN for Membership Partitions. To search the SAN for all
partitions that appear to be membership partitions, type this command:
mprepair --search_mps
The output includes each membership partition found by the search and
specifies whether it is active or inactive. The output also includes the
membership list on the disk containing the partition and the database
records for the partitions.
Resilver Membership Partitions. Typically, Matrix Server writes data to
one membership partition and then copies, or resilvers, that data to the
other membership partitions. Resilvering takes place automatically when
a change is made to the device naming database or when you add,
remove, or replace a membership partition.