3.4.0 Matrix Server Administration Guide

Chapter 13: Configure Device Monitors 158
Copyright © 1999-2006 PolyServe, Inc. All rights reserved.
decimal IP address of the hostname for the server, and <monitor_name>
is the name assigned to the
SHARED_FILESYSTEM device monitor.
•
CUSTOM monitor. Specify the pathname to the probe script to be used
with the monitor.
The following example shows a
device monitor created on the server svr1.
To add a device monitor from the command line, use this command:
mx device add [--type CUSTOM|DISK|GATEWAY|SHARED_FILESYSTEM]
[--timeout <seconds> [--frequency <seconds>] [--parameters
<parameters>] [<other_arguments>] <devicename> ...
Advanced Settings for Device Monitors
You can use the advanced settings to fine-tune device monitors. To access
the advanced settings, select the Advanced button on the Add Device
Monitor or Device Monitor Properties window.