3.4.0 Matrix Server Administration Guide

Chapter 10: Matrix Operations on the Applications Tab 119

•Add a service monitor.

• Enable or disable the virtual host.

• View or change the properties for the virtual host.

• Delete the virtual host.

To perform these procedures, left-click on the cell for the virtual host

(click in the Name column). Then right-click and select the appropriate

operation from the menu.See Chapter 9, “Configure Virtual Hosts” on

page 120 for more information about these procedures.

Service and Device Monitors

You can perform the same procedures on the Application tab as are

available when right-clicking on a service monitor or device monitor on

the other tabs. The procedures are as follows:

• Delete the monitor

• Modify the configuration of the monitor

• Enable or disable the monitor on a specific server

• View or clear the last error

• Remove from server

To perform these procedures, left-click on the cell corresponding to the

monitor and server. Then right-click and select the appropriate operation

from the menu.

For more information about using these procedures on service monitors,

see “Add or Modify a Service Monitor” on page 139 and “Other

Configuration Procedures” on page 148.

For more information about using these procedures on device monitors,

see “Add or Modify a Device Monitor” on page 156 and “Other

Configuration Procedures” on page 167.