3.4.0 Matrix Server Administration Guide

Chapter 10: Matrix Operations on the Applications Tab 114

Filter the Applications Display

You can use filters to limit the information appearing on the Application

tab. For example, you may want to see only a certain type of monitor, or

only monitors that are down or disabled. You can use filters to do this.

To add a filter, click the “New Filter” tab and then configure the filter.

Name: Specify a name for this filter.

On the Type tab shown above, select the types of virtual hosts, service

monitors, and device monitors that you want to see. If Solution Packs are

installed, devices for those products will appear on the Type tab.

Click on the State tab to select specific states that you are interested in

viewing. (The Applications tab will be updated immediately.)