3.4.0 Matrix Server Administration Guide

Chapter 8: Manage Disk Quotas 98
Copyright © 1999-2006 PolyServe, Inc. All rights reserved.
When you create a PSFS filesystem, you can specify whether quotas
should be enabled and you can set quota options on the filesystem. (See
“Create a Filesystem” on page 76.)
Quotas can also be enabled or disabled on an existing filesystem, using
either the PolyServe Management Console or Matrix Server commands.
The filesystem will be unmounted briefly during the enable/disable
operation.
NOTE: The enable/disable features provided with Windows utilities
cannot be used to enable/disable quotas, as those features do not
work with PSFS filesystems. These utilities will report messages
such as “One or more settings were not changed.”
Enable or Disable Quotas on the Management
Console
To enable or disable quotas on an existing filesystem, locate the filesystem
on the Management Console, right-click, and select Properties. Then go to
the Quotas tab on the Properties dialog.