3.1.2 Matrix Server Upgrade Guide

Chapter 4: Double Upgrade Procedures 55

28. Install the Management Console:

# rpm -i <mountpoint>/mxconsole-3.1.2-<xxxx>.i586.rpm

29. Copy your new license file to /etc/opt/polyserve/licenses/license on the

server.

30. If you did a fresh installation of the operating system, recreate mount

points for the PSFS filesystems.

31. Start Matrix Server on the upgraded server. Run this command:

# /etc/init.d/pmxs start

32. Repeat steps 18 through 31 on the remaining servers.

All servers are now running Matrix Server 3.1.2 in 64-bit mode.

If you want to enable filesystem quotas on your PSFS filesystems, you

will need to unmount the filesystems one-at-a-time and then enable

quotas. For more information, see “Enable or Disable Quotas” in Chapter

8 of the PolyServe Matrix Server Administration Guide.