3.1.2 Matrix Server SLES9 Release Notes

PolyServe Matrix Server Release Notes 21
Copyright © 1999-2006 PolyServe, Inc. All rights reserved.
Operating System and Environment Issues
14136 mxmpconf command does not add membership partitions
The mxmpconf command does not work correctly when it is
used to add a membership partition.
Workaround. Use the following command to add a new
membership partition. Matrix Server cannot be running on any
nodes of the cluster when you invoke the command.
$ mprepair --add_partition PSuid/partition_number
You can use the sandiskinfo command to obtain the disk uid
and partition number. The -u option shows information for
unimported disks, and should be used when Matrix Server is
not running. The -a option lists the partition information for
each disk.
After running mprepair --add_partition, you will need to
export the new configuration to the other nodes of the cluster.
You can do this through either the mxconfig utility or the
Configure Matrix window on the Management Console.
Defect
Description
307 Problem with running the Management Console remotely
If you run the Management Console with your display set to a
remote X host, the Management Console may not display
properly the first time you run it. You will need to exit the
Management Console and then reset it to correct the display.
Instead of accessing the Management Console in this manner,
we recommend that you install the Management Console and
run it locally. The Management Console is available for both
Linux and Windows systems.
Defect
Description