3.1.2 Matrix Server Administration Guide

Chapter 2: Matrix Administration 36

The Matrix Server configuration files are in the /etc/opt/polyserve and

/var/opt/polyserve directories. You can back up either the entire directories

or the following individual files.

Membership Partitions

Use the Matrix Server mpdump command to save the membership

partition data. The following command saves the data to the default

backup file (/var/opt/polyserve/run/MP.backup).

# /opt/polyserve/lib/mpdump -F

Be sure to back up /var/opt/polyserve after running mpdump.

To restore the membership partition data, use the Matrix Server

mpimport command. The following example imports the data from the

default membership partition backup file and recreates the membership

partitions.

# /opt/polyserve/lib/mpimport -s -M -F

NOTE:

Matrix Server must be stopped on all nodes when mpimport is

used. Database corruption can occur if the utility is executed

while Matrix Server is running on a node. mpimport fails if

Matrix Server is running on the current node; however, it does not

check the other nodes.

For more information about mpimport, see the PolyServe Matrix Server

Command Reference.

/etc/opt/polyserve /var/opt/polyserve

•cp_conf •mxsecret •FCswitches

• fc_pcitable • oem.conf • MPdata

• fence.conf • psSan.cfg • run/MP.backup

•licenses/license •scl.conf

•mxinit.conf •snap.conf

•mx_passwd