3.1.2 Matrix Server Administration Guide

Chapter 19: Other Matrix Maintenance 251
Copyright © 1999-2006 PolyServe, Inc. All rights reserved.
[root@venus1 /]# cd /tmp
[root@venus1 tmp]# /opt/polyserve/tools/mxcollect
This utility should only be run from a server with PolyServe
Matrix Server installed.
Collecting configuration data
mxcollect uses ssh to connect to each node in the matrix. As a result, you
will be prompted for the root password on each node and for the login
information for your FibreChannel switch. Following is an example.
Executing log collection on server: 99.12.4.21
root@99.12.4.21's password:
Running log collect
Checking for installed PolyServe packages
PolyServer Matrix Server is installed
Running Hardware Check
Querying Installed RPM's
Checking kernel version
Checking Current Ethernet Configuration
Collecting Matrix Log Files and Matrix Status
FC-Switch Configuration for switch venusswitch:
Enter switch login: admin
Enter password:
Communicating with fibre channel switch. Please wait..
Connection closed by foreign host.
Compressing collected data, this may take awhile...
PolyServe mxcollect is complete, please contact [e-mail]
for upload assistance.
Results of mxcollect cn be found in /tmp/matrixserver_info.tgz.
PolyServe Technical Support
Phone: [phone] (US and Int'l) or 1 (866)-329-4710 (US Only)
Email: [e-mail]
The resulting file, matrixserver_info.tgz, contains information for all nodes
in the cluster. The file is located in the directory where you executed
mxcollect.