3.1.2 Matrix Server Administration Guide

Chapter 13: Configure Device Monitors 190

To delete a device monitor from the command line, use this command:

mx device delete <devicename> ...

Disable a Device Monitor

Select the device monitor to be disabled from the Servers or Application

tab, right-click, and select Disable.

To disable a device monitor from the command line, use this command:

mx device disable <devicename> ...

Enable a Device Monitor

Select the device monitor to be enabled from the Servers or Application

tab, right-click, and select Enable.

To enable a device monitor from the command line, use this command:

mx device enable <devicename> ...

View Device Monitor Errors

To view the last error that occurred on a device monitor, select that

monitor on the Servers or Application tab, right-click, and select View

Last Error.

Clear Device Monitor Errors

To clear a error from a device monitor, select that monitor on the Servers

or Application tab, right-click, and select Clear Last Event.

To clear the device error from the command line, use this command:

mx device clear <devicename> <server> ...