HP StorageWorks 1/8 Tape Autoloader User and Service Guide (August 2005)

1/8 Tape Autoloader User and Service Guide 61
93 Cartridge load error A failure occurred while trying to load a
cartridge from its slot to the drive. Run the
System Test from the Diagnostic menu. If the
error recurs, contact your technical support
representative.
94 Cartridge unload error A failure occurred while trying to unload a
cartridge from the drive to its slot. Run the
System Test from the Diagnostic menu. If the
error recurs, contact your technical support
representative.
95 Import error An error occurred while trying to import a
data cartridge to a carousel slot. Run the
System Test from the Diagnostic menu. If the
error recurs, contact your technical support
representative.
96 Export error An error occurred while trying to export a data
cartridge from its carousel slot. Can be caused
by an empty slot that is expected to be full.
Run the System Test from the Diagnostic menu.
If the error recurs, contact your technical
support representative.
97 to 9F Reserved Contact your technical support representative.
A0 Carousel motion failure Error occurred during carousel movement
(position not found). Could be caused by a
missing or misaligned cartridge carrier, an
obstruction, or an unexpected cartridge in the
carousel path. Run the System Test from the
Diagnostic menu. If the error recurs, contact
your technical support representative.
A1 Cartridge transport position
error
Cartridge transport element is unable to reach
its desired position. Failure occurred while
trying to place a cartridge into or remove a
cartridge from the drive or a slot. Run the
System Test from the Diagnostic menu. If the
error recurs, contact your technical support
representative. Run the System Test from the
Diagnostic menu. If the error recurs, contact
your technical support representative.
Table 20 Main Error codes
Error Code Description Details