HP StorageWorks 1/8 Tape Autoloader User and Service Guide (August 2005)

Operating the autoloader36
Updating cartridge inventory
This option will analyze the slots and drives in the autoloader. To update the inventory information:
1. Ultrium 232, Ultrium 448 and Ultrium 960: From the Home Screen, press + or - until Go
Offline displays on the top line of the LCD screen. Press Enter to select. Press + or - until
Commands displays on the top line of the LCD screen. Press Enter to select.
All other models: From the Home Screen or Main menu, press + or - until Commands displays
on the top line of the LCD screen. Press Enter to select.
2. Press + or - until Re-inventory displays on the LCD screen. Press Enter to select.
The autoloader will now check the drive and each slot for the presence of a tape in order to update
the inventory information.
NOTE: This command is only needed if the inventory in the autoloader is different than the
inventory displayed on the front panel, which would not happen under normal conditions.