HP StorageWorks 1/8 Tape Autoloader User and Service Guide (August 2005)

1/8 Tape Autoloader User and Service Guide 25
Operator’s panel control buttons
The Operator’s Panel includes four buttons that provide access to all operations and information
menus.
Understanding the menu structure (Ultrium 232, Ultrium 448 and
Ultrium 960)
The Ultrium 232, Ultrium 448 and Ultrium 960 Tape Autoloaders have an online and an offline
mode. You need to be in Offline mode to access the full menu structure; in Online mode only the
Information menu is available, as illustrated in Figure 11 on page 26. For all other Tape
Autoloader models see ”Understanding the menu structure (all other models)” on page 27.
Media Attention Amber Illuminated if the tape drive has detected a cartridge or
tape fault. Recommended action is to export the cartridge
from the autoloader. Doing so turns off the LED. See
”Exporting tape cartridges” on page 31. If a particular
cartridge causes these symptoms repeatedly, that cartridge
may be defective.
Error Red Illuminated if an unrecoverable tape drive or autoloader
error occurs. A corresponding error message displays on
the LCD screen (see ”Autoloader error codes” on page 58
for more information).
Table 10 LEDs
LED Color Description
Table 11 Control buttons
Button Description
Cancel Cancels the current menu option and returns to the previous menu level or
Home screen.
Previous Selects the previous item or value in the currently displayed menu.
Next Selects the next item or value in the currently displayed menu.
Enter Executes the current menu or selects the current option displayed on the LCD
panel.