HP StorageWorks All-in-One SB600c Storage Blade Solution quick start instructions (452694-002, October 2007)

3
Connect to the storage system
Direct attach method
1. Connect the local I/O cable (4) to the server blade.
2. Connect a monitor (1), USB mouse (2), and USB keyboard
(3) to the local I/O cable.
Remote methods
In order to access the storage system using the remote desktop or
remote browser method, you must first install, map, and connect the
enclosure interconnect modules to your network. See the documenta-
tion that ships with the enclosure for detailed instructions.
For iLO 2 access, the server blade iLO 2 ports and interconnect
module management ports can obtain IP addresses on the manage-
ment network through DHCP address, static IP address or Enclosure
Bay IP Addressing (EBIPA). See the HP BladeSystem Onboard Admin-
istrator User Guide for detailed instructions.
By default, the server blade is configured with 2 embedded NIC
ports. These 2 embedded NIC ports map to interconnect bay num-
bers 1 and 2 on the c7000 enclosure and interconnect bay number 1
on the c3000 enclosure.
After connecting the the storage system, ensure that the HP Storage-
Works All-in-One Storage System installation process has completed.
After the installation process is complete, the system prompt appears.
At the system prompt, enter the default user name and password:
user name = administrator
password = hpinvent
After logging in for the first time, the Welcome screen of the Rapid
Startup Wizard opens.