HP StorageWorks All-in-One SB600c Storage Blade Solution quick start instructions (452694-002, October 2007)

1
Prepare for installation
Check kit contents
Unpack the HP StorageWorks All-in-One SB600c Storage Blade Solution and confirm that the following components are included:
• HP StorageWorks AiO SB600c Storage Blade
• HP StorageWorks AiO SB600c Server Blade
• Local I/O cable
• Documentation Kit, Safety and Disposal Documentation CD
• HP StorageWorks AiO Storage Blade System Recovery DVD
• End User License Agreement
Determine an access method
Before installing the storage system hardware, decide on an access method that will be used to connect to the storage server.
NOTE: If your HP AiO SB600c Storage Blade Solution is factory-integrated, it will be included in an HP BladeSystem c-Class Enclosure.
Access method
Procedure
Requirements
Direct attach
Connect a monitor, keyboard, and mouse
directly to the server blade using the local
I/O cable.
Monitor, USB keyboard, USB mouse, and local
I/O cable are required.
Remote browser
Access the storage system through a
client running Internet Explorer 5.5
(or later).
ActiveX controls must be enabled on the remote client,
the serial number or IP address of the storage system is
required, and the All-in-One Storage System installation
process must be complete.
Remote desktop
Access the storage system through a
client running Remote Desktop
Connection.
Serial number or IP address of the storage system is
required and the All-in-One Storage System installation
process must be complete.
iLO 2
Access the storage system through a client
running HP Integrated
Lights-Out 2.
iLO 2 Network Settings and an Onboard Administrator
Ethernet connection to the management network are
required.