HP StorageWorks All-in-One SB600c Storage Blade Solution quick start instructions (452694-002, October 2007)

ManualsBrandsHP ManualsStorageHP StorageWorks AiO SB600c Storage Blade

Printed on at least 50% total recycled fiber

with at least 10% post-consumer paper

First edition (October 2007)

Printed in the US.

www.hp.com

Part no. 452694-002

452694-002

HP StorageWorks

All-in-One SB600c Storage

Blade Solution quick start

instructions

About this document Important safety information

Les "Viktig sikkerhetsinformasjon" på dokumentasjons-CDen før du installerer dette produktet.

Læs dokumentet Vigtige sikkerhedsoplysninger på dokumentations-cd'en, før produktet installeres.

Prima dell'installazione, leggere sul CD le Informazioni importanti sulla sicurezza.

Tärkeisiin turvatietoihin" Documentation CD -levyllä ennen tuotteen asentamista

Läs dokumentet Viktig säkerhetsinformation på dokumentations-cd:n innan du installerar denna produkt.

Important Safety Information

These instructions are intended for professionals who

will be installing, setting up, and configuring the

All-in-One SB600c Storage Blade Solution.

Experience with the following technologies is helpful,

but not required:

• HP BladeSystem c-Class Enclosures and Onboard

Administrator

• HP Integrated Lights-Out 2 (iLO 2) Standard Firmware

• Microsoft® administrative procedures and system and

storage configurations

The Quick Start poster provides you with basic

instructions to get up and running using the system

default options. For more detailed information, or

information about non-default options available to

you, refer to the documentation included with your

product.

Other HP documentation can be found with this

product, on the documentation CD, and on the HP

documents Web site at:

http://www.hp.com/support/manuals.

Summary of content (8 pages)

PAGE 1
HP StorageWorks All-in-One SB600c Storage Blade Solution quick start instructions About this document These instructions are intended for professionals who will be installing, setting up, and configuring the All-in-One SB600c Storage Blade Solution.
PAGE 2
1 Prepare for installation Check kit contents Unpack the HP StorageWorks All-in-One SB600c Storage Blade Solution and confirm that the following components are included: • HP StorageWorks AiO SB600c Storage Blade • HP StorageWorks AiO SB600c Server Blade • Local I/O cable • Documentation Kit, Safety and Disposal Documentation CD • HP StorageWorks AiO Storage Blade System Recovery DVD • End User License Agreement NOTE: If your HP AiO SB600c Storage Blade Solution is factory-integrated, it will be included i
PAGE 3
2 Install the storage solution hardware and power on Install the storage and server blades IMPORTANT! If your HP AiO SB600c Storage Blade Solution is factory-integrated, the server and storage blades are pre-installed in an HP BladeSystem c-Series Enclosure. See the documentation that ships with the enclosure for instructions on connecting and powering on the enclosure. The AiO SB600c Storage Blade Solution consists of a server blade and storage blade.
PAGE 4
3 Connect to the storage system Direct attach method 1. Connect the local I/O cable (4) to the server blade. 2. Connect a monitor (1), USB mouse (2), and USB keyboard (3) to the local I/O cable. Remote methods In order to access the storage system using the remote desktop or remote browser method, you must first install, map, and connect the enclosure interconnect modules to your network. See the documentation that ships with the enclosure for detailed instructions.
PAGE 5
4 Set up the system with the Rapid Startup Wizard The Rapid Startup Wizard guides you through setting up your system with basic configuration information. Before migrating data from other applications or configuring other storage settings, you should complete the Rapid Startup Wizard. 1. On the Rapid Startup Wizard Welcome screen, click Next. The following table lists the configuration data that is needed to complete the Rapid Startup Wizard and initialize the All-in-One SB600c Storage Blade Solution.
PAGE 6
5 Prepare for data migration After basic configuration information has been set using the Rapid Startup Wizard, a dialog box appears that provides additional storage and data migration configuration options; however, depending on your needs, an additional installation procedure might be needed before proceeding. 2. Navigate to the \All-in-One Storage Manager\Agent folder on the DVD. 3. Double-click asmagentinstaller.exe. 4. Follow the on-screen installation instructions.
PAGE 7
6 Configure storage and schedule data migration After preparing for data migration, you can schedule the migration using the wizards that are available on the Storage Hosting screen. You can also allocate storage settings by clicking Create a shared folder. NOTE: If you do not need to perform any of these tasks at this point during the configuration process, click Close.
PAGE 8
7 Manage your storage After you have used the All-in-One SB600c Storage Blade Solution wizards to configure your storage settings and migrate application data, you can monitor your applications and modify settings with the All-in-One Storage Manager. In the Action pane, choose from the following views: • Application View — Monitors storage values for applications and shared folders. • Storage View — Monitors storage values for logical disks and volumes.