HP StorageWorks All-in-One SB600c Storage Blade installation instructions (AG780-96002, September 2008)

Figure 1 Inte
rconnect bay numbering and device mapping
(c7000 encl
osure)
Blade signal Interconnect bay Interconnect bay label
NIC 1 (embedded)
1
NIC 2 (embedded)
2
Mezzanine 1
3and4
Mezzanine 2
5and6
7and8
Figure 2 Inte
rconnect bay numberin g and device m apping
(c3000 encl
osure)
Blade signal
Interconnect
bay
Interconnect
bay label
Notes
NICs 1 and 2
(embedded
)
1
Mezzanine 1
2
Four port cards
connect to bay
2
Mezzanine 2 3, 4
• Four port
cards
• Ports 1 and
3connect
to bay 3
• Ports 2 and
4connect
to bay 4
Mezz
anine 3
3, 4
• Four port
cards
• Ports 1 and
3connect
to bay 3
• Ports 2 and
4connect
to bay 4
For detailed port mapping information, see the HP BladeSystem
enclosure installation poster or the HP BladeSystem enclosure setup
and installation guide on the HP website (http:/ /www.hp.com/go/
bladesystem/documentation).
Connecting to the network
T
o connect th e H P BladeSystem to a network, each enclosure must
be configured with network interconnect devices to manage signals
between the blades and the external network.
Two types of interconnect modules are available for HP BladeSystem
c-Class enclosures: Pass-thru m odules and switch modules. For more
information about interconnect module options, see the HP website
(http://w ww.hp.com/go/bladesystem/interconnects) .
Page 2