HP StorageWorks 700ux/1100ux Optical Jukebox Service Manual (AA962-96004, September 2004)

Service Preparation

34 700ux/1100ux Optical Jukebox Service Manual

6. Connect the cables to the drive (see Figure 9):

a. Connect the drive interface ribbon cable (the smaller of the two ribbon cables) to the

drive.

b. Connect the SCSI cable (the larger of the two ribbon cables) to the 68-pin converter.

c. Connect the power cable to the drive.

Note: Connect the left-most drive interface cable on the jukebox controller board to the left-most

drive, and the right-most drive interface cable on the jukebox controller board to the right-most drive.

Figure 9: Connect the cables to the drive

7. Slide the drive all the way into the jukebox so that the faces of the drive rails meet the

jukebox frame.

1 Back of drive

2 Slot for power cable

3 Slot for SCSI cable (68-pin connector)

4 Slot for drive interface ribbon cable

5 Power cable

6 SCSI cable

7 Drive interface ribbon cable