HP StorageWorks 700ux/1100ux Optical Jukebox Service Manual (AA962-96004, September 2004)

Service Preparation
28 700ux/1100ux Optical Jukebox Service Manual
7. Remove the two T-10 Torx screws securing the rails to the drive, one rail on each side of
the drive (see Figure 4).
Figure 4: Remove the drive rails (the rail on the right side of the drive is shown)
8. Remove the rails from the drive.
9. Attach the rails to the replacement drive, using two T-10 Torx screws previously removed.
Note: No specific alignment or adjustment of the bracket is needed.
1 Drive
2 Drive rails
3 Screws securing rails to drive
1
2
3