HP StorageWorks 3800ux/7100ux Optical Jukebox Conversion Guide (AA991-96001, May 2004)

Convert an MO Jukebox to UDO or Mixed-Media Technology

293800ux/7100ux Optical Jukebox Conversion Guide

Install and reconnect cables

To install the new cables:

1. On the upper interposer board, connect the following cables:

■ Upper path clear sensor cable

■ Front panel cable

■ Mailslot cable

2. Locate the 50-pin GPIO cable and position it so that the center polarizing keys face you,

and the interposer connectors are to the right.

3. Attach the cable connector to the controller board (see Figure 10).

Figure 10: 50-pin GPIO cable connections

1 Controller board

2 Upper interposer board

3 Lower interposer board

4 50-pin GPIO cable

5 50-pin GPIO cable connected to controller board

6 50-pin GPIO cable connected to upper interposer

7 50-pin GPIO cable connected to lower interposer