HP StorageWorks 3800ux/7100ux Optical Jukebox Conversion Guide (AA991-96001, May 2004)

Convert an MO Jukebox to UDO or Mixed-Media Technology
193800ux/7100ux Optical Jukebox Conversion Guide
Remove the interposer board(s)
Caution: Parts can be damaged by electrostatic discharge. Keep parts in their containers
until needed. Ensure you are properly grounded when touching static-sensitive components.
To remove the interposer board(s):
1. Remove all cables from the interposer board(s).
Jukeboxes with 4 or 6 drives will have only one interposer board. Jukeboxes with 10 drives
will have two interposer boards (see Figure 1).
2. If there is a configuration module on the upper interposer board, remove it and set it aside
for later use.
3. For each interposer board, remove the 8 T-20 torx screws that secure it to the jukebox (see
Figure 2).
4. Remove the interposer board(s) from the jukebox.
5. Discard or recycle the interposer board(s).
Figure 2: Upper interposer board and screws that secure it to the jukebox
1 Upper interposer board
2 Configuration module
3 Screws
1
3
2