HP StorageWorks 3800ux/7100ux Optical Jukebox Conversion Guide (AA991-96001, May 2004)

Convert an MO Jukebox to UDO or Mixed-Media Technology
18 3800ux/7100ux Optical Jukebox Conversion Guide
Remove existing drives
Caution: Parts can be damaged by electrostatic discharge. Keep parts in their containers
until needed. Ensure you are properly grounded when touching static-sensitive components.
To remove existing drives:
1. Disconnect cables that connect the drives to the interposer board at the interposer board
end.
2. For each drive module, remove the 2 T-20 torx screws from each side of the drive module
(4 screws total).
3. Carefully slide the drive module back and out of the chassis.
Note: If you are converting to mixed-media, set aside the drive modules for later use. If you are
converting to UDO only, discard or recycle these drives.