HP StorageWorks 30ux Standalone UDO Drive Setup Guide (AA961-96002, May 2004)

Configuration
32 HP StorageWorks 30ux Standalone UDO Drive Setup Guide
Loading UDO media
Note: Label all disks before loading them into the standalone UDO drive. Some
application software packages require that you load and eject disks by using
instructions in the software. If you use a software application to manage files in the
standalone UDO drive, check the software documentation before proceeding with these
steps.
Load UDO media into the drive by inserting the disk gently but firmly into the
opening on the front panel, shutter end first, and with the side you want to access
facing up (A or B). See Figure 8. The drive will automatically pull the disk fully
into position.
Figure 8
Figure 8: Loading media
Note: For detailed information on using or ordering HP UDO media, refer to the
getting started poster and the user’s guide that shipped with the standalone UDO drive.