2300ux Optical Jukebox Conversion Guide (AA994-96001, May 2004)

Converting an MO Jukebox to UDO or Mixed-Media Technology

32 1000ux/1900ux/2300ux Optical Jukebox Conversion Guide

Installing the new interposer board

To install the new interposer board:

1. Position the three ribbon cables (coming back into the frame through the upper slot) with

respect to the new interposer board. The GPIO and single-ended SCSI cable will be behind

the interposer board (see Figure 17 for cable locations); the 68-pin SCSI cable will not.

Figure 17: Cables routed to new interposer board

2. Attach the 68-pin SCI cable to the interposer board.

1 68 -pin SCSI cable

2 50-pin GPIO cable

3 50-pin single-ended SCSI cable