2300ux Optical Jukebox Conversion Guide (AA994-96001, May 2004)

Converting an MO Jukebox to UDO or Mixed-Media Technology

18 1000ux/1900ux/2300ux Optical Jukebox Conversion Guide

Removing the existing drives

Caution: Parts can be damaged by electrostatic discharge. Keep parts in their containers

until needed. Ensure you are properly grounded when touching static-sensitive components.

To remove the existing drives:

1. Remove the DC power cable, the SCSI cable, the drive fan cable, and the drive interface

cable for the existing drives from the interposer board.

2. Remove the (1 or 2) T-20 screws from the left side of each drive module.

3. Carefully slide the drive module out of the chassis.

Note: If you plan to retrofit and reinstall two 14x MO drives, set these assemblies aside for later use.