HP StorageWorks 2000sa Modular Smart Array Cable Configuration Guide (619367-001, April 2010)

Dual density blade enclosure
IMPORTANT:
This configuration is for dual density servers only.
Additional MSA2012sa enclosures
IMPORTANT:
Maximum number of MSA2012sa supported for this
configuration is 4.
BladeSystem enclosure 1
3Gb SAS BL
Switch D
3Gb SAS BL
Switch C
3Gb SAS BL
Switch B
3Gb SAS BL
Switch A
Port 1 to
SAS B1
Port 1 to
SAS A1
Port 1 to
SAS B0
Port 1 to
SAS A0
MSA2012sa
1
Port 2 to
SAS B1
Port 2 to
SAS A1
Port 2 to
SAS B0
Port 2 to
SAS A0
MSA2012sa
2
Port 3 to
SAS B1
Port 3 to
SAS A1
Port 3 to
SAS B0
Port 3 to
SAS A0
MSA2012sa
3
Port 4 to
SAS B1
Port 4 to
SAS A1
Port 4 to
SAS B0
Port 4 to
SAS A0
MSA2012sa
4
Additional information sites
HP manuals: http://www.hp.com/support/manuals
MSA products: http://www.hp.com/go/msa
Storage products: http://www.hp.com/storage
Servers: http://www.hp.com/go/servers
SAN infrastructure: http://www.hp.com/go/san
BladeSystem products: http://www.hp.com/go/bladesystem
Page 4