Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

48 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
convert master-to-std
Description
Converts a specified master volume into a standard volume; that is, it disables the
volume from accepting snapshots.
You must delete all snapshots that exist for the master volume before converting it
to a standard volume; otherwise, the command will fail.
Input
Example
Convert master volume MV1, having no snapshots, to a standard volume.
Related Commands
■ “delete all-snapshots” on page 71
■ “show master-volumes” on page 200
convert master-to-std volume
Parameter Description
volume Specifies the volume by its name or serial number. For the syntax to use,
see “Volume Syntax” on page 26.
# convert master-to-std MV1
Success: Convert Master to Standard Volume Complete.