Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

26 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
Virtual Disk Syntax
You can specify virtual disks by using:
■ Virtual disk name. A user-defined, case-sensitive name that can include a
maximum of 17 characters, but not comma, quotation mark (
"), or backslash. A
name that includes a space must be enclosed in quotation marks.
To use a name that the CLI could interpret as an optional parameter, you must
specify that parameter before the name parameter.
■ Virtual disk serial number. A unique 32-digit number that is automatically
assigned when a virtual disk is created, and does not change for the life of the
virtual disk.
■ A list of names or serial numbers separated by commas (with no spaces). Some
commands do not support lists. This example specifies a name and a serial
number:
Volume Syntax
You can specify volumes by using:
■ Volume name. A user-defined, case-sensitive name that can include a maximum
of 20 characters, but not comma, quotation mark (
"), or backslash. A name that
includes a space must be enclosed in quotation marks.
To use a name that the CLI could interpret as an optional parameter, you must
specify that parameter before the name parameter.
■ Volume serial number. A unique 32-digit number that is automatically assigned
when a volume is created, and does not change for the life of the volume.
■ A list of names or serial numbers separated by commas (with no spaces). Most
commands do not support lists. This example specifies a serial number and a
name:
VD1,00c0ff0a43180048e6dd1c4500000000
AA43BF501234560987654321FEDCBA,”Vol #1”