Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

Chapter 3 Command Descriptions 243
Input
To enable the trust command:
To trust a virtual disk:
Example
Enable the trust command and then trust virtual disk VD1.
trust enable
trust vdisk vdisk
Parameter Description
enable Enables the trust command before use
vdisk vdisk Specifies the virtual disks by name or serial number. For the
syntax to use, see “Virtual Disk Syntax” on page 26.
# trust enable
Trust Virtual-disk Enabled.
# trust vdisk VD1
Are you sure? yes
Virtual-disk VD1 has been trusted.