Hp StorageWorks 2000 Family Modular Smart Array CLI reference guide (481600-002, May 2008)

Chapter 3 Command Descriptions 195
show iscsi-hosts
Description
iSCSI only. Shows iSCSI host initiators.
Input
Output
Example
Show iSCSI host initiators.
Related Commands
■ “create iscsi-host” on page 53
■ “delete iscsi-host” on page 75
■ “set iscsi-host” on page 134
show iscsi-hosts
Field Description
Host node name/IQN iSCSI host initiator’s node name, typically the IQN. If
the host node name exceeds 62 characters and the CLI is
in console mode, the node name that is displayed is
truncated and a ‘>’ is displayed at the end of the string.
If you need to see the full node name, use show host-
maps or use the CLI’s api mode to view the output in
XML format.
Name iSCSI host initiator’s nickname, if any.
# show iscsi-hosts
Host node name/IQN Name
-----------------------------------------------------------------------------
iqn.1991-05.com.microsoft:myHost.domain myHost
iqn.1991-05.com.microsoft:myLongHost.my-very-long-domain-nam> myLongHostName
-----------------------------------------------------------------------------