HP StorageWorks 2000 Modular Smart Array Controller Module Replacement Instructions (488318-003, April 2010)

Verifying configuration settings
After replacing a controller, verify that system configuration settings are
set properly for your environment. Repeat the commands shown in
“Recording configuration settings” on page 2 and compare the current
values with those recorded before the installation. If necessary, change
the settings to their previous values. For more information, see online
help or the HP StorageWorks 2000 Family Modular Smart Array
reference guide.
Verifying the firmware version
After installing a controller, verify that the latest firmware is installed on
all controllers in the enclosure. Go to the HP Support website at
nl
http://www.hp.com/support and navigate to the page for your
enclosure. If newer firmware is available, download the firmware from
the Web to your local system and install that latest version on the
controllers. For more information on firmware updates, see the enclosure
user guide.
Returning the failed items
In materials shipped with the replacement, HP specifies whether the
failed component must be returned. Follow the provided instructions.
Additional information
HP P2000/MSA Disk Arrays: http://www.hp.com/go/msa
HP storage: http://www.hp.com/storage
HP support: http://www.hp.com/support
HP documents: http://www.hp.com/support/manuals
Page 4