HP 2000 Modular Smart Array Controller Firmware J202P01, J212P01, and J302P01 Release Notes (537811-008, December 2012)

• set vdisk command: When changing the vdisk name, the name was rejected as being invalid.
• set debug log parameters command: command returned an error message and would
not perform the requested action.
• expand snap-pool size max command and variable: returned an error message.
• clear events command: Improved online help.
• set host-wwn-name command: Setting the host-wwn-name did not work as expected.
• set iscsi-host host <host> <new-nickname> command: Was unable to enter an IQN
alias name.
• show host-wwm-names: Did not work as expected.
SMU-specific fixes and enhancements incorporated into J202R10, J212R10, and J302R10:
• When a dedicated spare of a vdisk was deleted, the drive was marked as “leftover”.
• HP SMU incorrectly assigned reads as RAIDar, resulting in a restart.
Firmware update-specific fixes and enhancements incorporated into J202R10, J212R10, and J302R10:
• All drives in enclosures 1 and 3 were reported as unknown following a firmware update.
• Partner Firmware Update (PFU) did not properly update the firmware on Controller B.
• After a failover, vdisk ownership did not change to the operating controller.
• After performing a firmware upgrade, some drives were errantly reported as duplicate/leftover
drives.
• After a firmware update, multiple drives are marked as “leftover”.
• After upgrading firmware, the array had to be restarted.
• After a firmware upgrade, the controller stalled.
• A firmware upgrade failed.
Fixes and enhancements 7