HP StorageWorks 1500 Modular Smart Array maintenance and service guide (356606-002, October 2006)

Fibre Channel I/O module LEDs
The Fibre Chann
el I/O module has three bi-color LEDs. the following figure and table describe their
locations and meanings.
1
2
3
15506
Item Name
Condition Color
Description
Off
—
Power not applied to Fibre Channel
I/O module, controller not plugged
in, or unsuccessful controller POST
Solid
Green
Power app
lied and connection
establis
hed between Fibre Channel
I/O modu
le and Fibre Channel
control
ler
1
Status
Blinking Amber Power is applied but there is no
link to the controller or there is no
controller present
Solid
Green
A 1-Gb link is established and the
status is good
2
1-Gb link status
Blinking Amber A 1-Gb link was established but is
now inactive
Solid
Green
A 2-Gb link is established and the
status is good
3
2-Gb link status
Blinking Amber A 2-Gb link was established but is
now inactive
NOTE:
If both link status lights are Off, a link has not been established since the application of power,
initiation of a reset, hot-plug of Fibre Channel I/O module, removal of the transceiver, or
hot-plug of the transceiver.
If both link status lights are blinking amber, the MSA controller has been removed or a link cannot
be established.
maintenance and service guide
27