HP StorageWorks 1500 Modular Smart Array maintenance and service guide (356606-002, October 2006)

Chassis specifi
cations
Item
Description
Height
8.79 cm (3.46 in)
Width
48.41cm(19.06in)
Depth
61.77cm(24.32in)
Weight 24.95 kg (55 lb)
Input voltage requirements
Rated input voltage
100 to 240 VAC
Rated input frequency
50 Hz to 60 Hz
Ratedinputcurrent 6.4AMax,1Atypical
(MSA1000 was 7.35 A Max)
Input power (max)
400W Max, 95W typical
Power supply specifications
Rated steady-state power
377 watts
Maximum peak power
681 watts
Btus
2187 Btu/hr*
Temperature range
Operating
10° to 35° C (derated 1°C per 1000 feet of elevation
to 10000 ft.); (50° to 95° F)
Shipping
-30° to 50° C (-22° to 122° F)
Relative humidity (noncondensing)
Operating 10% to 90%
Non-operating
up to 95%
Maximum wet-bulb temperature
Long term storage
29°C (84.2°F)
Short term storage
30°C (86°F)
Idle <6.9 and 53
Fixed drive (random writes) <7.3 and 54
* Input power and heat dissipation specifications are maximum values and apply to worst-case conditions
at full rated power supply load. The power/heat dissipation for your installation varies depending on the
equipment configuration.
Memor
yspecifications
Item
Description
Speed
100 MHz minimum
Width 80 bit
s
NOTE:
Use only HP battery-backed cache accelerator modules.
16
Specifications