HP StorageWorks 1000/1500 Modular Smart Array application note: Migrating to active/active controllers in Windows environments (400678-002, October 2006)

26 Migrating multi-path standalone systems
5
Enable network connections on the system
• From the server console desktop, select Start>Run.
• In the Run window, enter ncpa.cpl and then click OK to open the Network (and
Dial-up) Connections Utility.
• Right-click each network connection, and then select Enable.
• Close the Network (and Dial-up) Connections Utility.
F
6
Restart the system unit.
F
7
Verify that the HP MPIO DSM Manager can access MSA the disk array:
• From the server console desktop, select Start>Run.
• In the Run window, enter compmgmt.msc and then click OK to open the Computer
Management Utility.
• In the left pane, click Computer Management>Storage>HP MPIO DSM Manager.
• Verify that the HP MPIO DSM Manager can locate and access the updated MSA
disk array.
• Close the Computer Management window.
F
8
Re-enable all applications and verify that they are functioning properly.
F
9
Verify that users and applications can access MSA disk array.
F
10
Review the MSA1000/1500 active/active controllers best practices guide to
maximize system performance and high availability.
F
Step Description Check