HP StorageWorks Storage Mirroring Recover User's Guide (T5437-96021, November 2010)

Workload protection Page 284 of 677
l Source VirtualCenter server—Select the VirtualCenter server that
administrators the virtual machine you want to protect. If you are not using
VirtualCenter, select None.
l Virtual machine to protect—Specify the name of the virtual server you want
to protect. You can click Browse to select a server from a network drill-down
list or to search for a server. Once you have specified a virtual server to
protect, the IP address or DNSof the ESX server will be displayed.
Note: Each protection job applies to a single virtual machine.
Virtual machines using ESXraw or independent disks are not
supported.
If your virtual machine is configured to use thin (sparse disks), the
replica on the target will not be a thin disk. Make sure there is
adequate space on the target.
The virtual machine name cannot contain any of the following special
characters.
# / \ : * ? ' " < > |