HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

enable or disable transmission limiting.
Command
SCHEDULE ENABLE
Description
Enables the transmission schedule
Syntax
SCHEDule <target> ENABLE
Options
target—Name of the target, an IP address on the target, or a virtual
IP address. Depending on the network route Storage Mirroring
Recover uses to access the target, you may need to specify the fully
qualified domain name.
Examples
l schedule beta enable
l sched beta enable
Notes
Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
Command
SCHEDULE DISABLE
Description
Disables the transmission schedule without clearing the schedule
data
Syntax
SCHEDule <target> DISABLE
Options
target—Name of the target, an IP address on the target, or a virtual
IP address. Depending on the network route Storage Mirroring