HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

l Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
7. Configure the failover settings by using the monitor option command.
Command
MONITOR OPTION
Description
Configures the settings to determine how failover will be performed
Syntax
MONitor OPTION [MOVENAME | NOMOVENAME] [,
MOVEADDRESSES | NOMOVEADDRESSES] [, MOVESHARES |
NOMOVESHARES] [, ADD | REPLACE] [, USESHAREFILE |
NOUSESHAREFILE][, FAILONE | FAILALL] [, FODELAY |
NOFODELAY] [, FBDELAY | NOFBDELAY] [, APPLY | DISCARD |
REVERT] [, INTERVENTION | NOINTERVENTION] [,
FOHOSTNAME | NOFOHOSTNAME] [, FBHOSTNAME |
NOFBHOSTNAME] [monitor]
Options
l MOVENAME—Moves the server name during failover
l NOMOVENAME—Does not move the server name during failover
l MOVEADDRESSES—Moves the IP address(es) during failover
l NOMOVEADDRESSES—Does not move the IP address(es)
during failover
l MOVESHARES—Moves the shares during failover
l NOMOVESHARES—Does not move the shares during failover
l ADD—Specifies the source machine’s identity is added to the
target machine’s identity when failover occurs
l REPLACE—Specifies that the source machine’s identity replaces
the target machine’s identity when failover occurs
l USESHAREFILE—Use the Storage Mirroring Recover generated
.shr file to determine shares
l NOUSESHAREFILE—Do not use the Storage Mirroring Recover
generated .shr file to determine shares