HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Notes
Machine names that contain non-alphanumeric characters must be
enclosed in quotation marks.
4. Specify that you want to use the monitor that was just created by using the monitor
use command.
Command
MONITOR USE
Description
Specifies the source machine designated as the monitor that will be
used in subsequent monitor commands
Syntax
MONitor USE <monitor>
Options
monitor—Name of the source machine designated as the monitor .
Examples
l monitor use alpha
l mon use alpha
Notes
Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
5. Configure the monitor settings (including the IP address to monitor, the target NIC
that will assume the IP address when it fails, the monitor interval and missed
packets) by using the monitor move command.
Command
MONITOR MOVE