HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

74 of 332
6. To clear the schedule use the limit bandwidth schedule clear command.
Command LIMIT BANDWIDTH SCHEDULE CLEAR
Description Clears a bandwidth schedule
Syntax LIMIT BANDWIDTH SCHEDULE CLEAR <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address. Depending on the network route Storage Mirroring
Recover uses to access the target, you may need to specify the
fully qualified domain name.
Examples limit bandwidth schedule clear beta
Notes
Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
7. You can enable the schedule by using the limit bandwidth schedule enable
command.
Command LIMIT BANDWIDTH SCHEDULE ENABLE
Description Enables a bandwidth schedule
Syntax LIMIT BANDWIDTH SCHEDULE ENABLE ON <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address. Depending on the network route Storage Mirroring
Recover uses to access the target, you may need to specify the
fully qualified domain name.
Examples limit bandwidth schedule enable on beta
Notes
Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
8. You can disable bandwidth limiting by using the limit bandwidth disable command.
Command LIMIT BANDWIDTH DISABLE
Description
Disables a bandwidth schedule without losing the schedule
settings
Syntax LIMIT BANDWIDTH DISABLE ON <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address. Depending on the network route Storage Mirroring
Recover uses to access the target, you may need to specify the