HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

73 of 332
Monday through Friday, would start at 8:00 p.m., and would not limit the bandwidth.
(To create an unlimited event, set the limit option to the keyword UNLIMITED.) In
this schedule, on Monday at 6:00 a.m., the schedule limit would be applied, limiting
the transfer of data. At 8:00 p.m. that night, the schedule limit would be applied
again, unlimiting the transfer of data. At 6:00 a.m. Tuesday morning, the schedule
would be applied again. This would continue until the Friday 8:00 p.m. schedule is
applied. That event would remain in effect until Monday morning at 6:00 a.m.
4. If you want to review the schedule for a target, use the limit bandwidth schedule list
command.
Command LIMIT BANDWIDTH SCHEDULE LIST
Description Displays the bandwidth schedule for a target
Syntax LIMIT BANDWIDTH SCHEDULE LIST <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address. Depending on the network route Storage Mirroring
Recover uses to access the target, you may need to specify the
fully qualified domain name.
Examples limit bandwidth schedule list beta
Notes
Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
5. If you need to remove a scheduled event, use the limit bandwidth schedule remove
command.
Command LIMIT BANDWIDTH SCHEDULE REMOVE
Description Removes a scheduled bandwidth event
Syntax
LIMIT BANDWIDTH SCHEDULE REMOVE <label> FROM <
target>
Options
● label—Unique name identifying the existing bandwidth
schedule event that you want to remove
● target—Name of the target, an IP address on the target, or a
virtual IP address. Depending on the network route Storage
Mirroring Recover uses to access the target, you may need to
specify the fully qualified domain name.
Examples limit bandwidth schedule remove weekdays from beta
Notes
Options that contain non-alphanumeric characters must be
enclosed in quotation marks.