HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

35 of 332
Reconnecting automatically
Use the AutoReconnect option with the get and set commands to configure Storage
Mirroring Recover to reconnect connections automatically.
Command GET
Description
Requests the value of a Storage Mirroring Recover program setting
from the specified server
Syntax GET <setting> [machine]
Options
● setting—See Server settings for a complete list of the
Storage Mirroring Recover program settings
● machine—Name of the machine
Examples
● get netport
● get VerifyLogName
● get DefaultAddress
Notes
● If you do not specify a machine name, the value from the
current source will be returned. If you have not identified an
active source, no data will be returned.
● Machine names that contain non-alphanumeric characters
must be enclosed in quotation marks.
Command SET
Description
Modifies the value of a Storage Mirroring Recover program setting
for the specified server
Syntax SET <setting>=<value> [machine]
Options
● setting—See Server settings for a complete list of the
Storage Mirroring Recover program settings
● value—See Server settings for a complete list of the values
for each Storage Mirroring Recover program setting
● machine—Name of the machine
Examples
● set netport=1100
● set DefaultAddress="129.12.34.3"