HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

307 of 332
Snapshot Schedule Enable
Command SNAPSHOT SCHEDULE ENABLE
Description Enables a disabled snapshot schedule
Syntax SNAPshot SCHEDule <con_id> ENABLE [ON <target>]
Options
● con_id—Connection ID assigned to the source/target
connection
● target—Name of the target, an IP address on the target, or a
virtual IP address
Examples
● snapshot schedule 1 enable
● snap sched 1 enable
Notes
Target names that contain non-alphnumeric characters must be
enclosed in quotation marks.