HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

104 of 332
Notes
● If you do not specify a monitor, the current source designated
as the monitor will be used. If you have not identified a
monitor, you will receive an error message stating that a
monitor has not been selected.
● Depending on your sequence of commands, you may need to
use the monitor get command to specify an active monitor
before using monitor display.
● Monitor names that contain non-alphanumeric characters
must be enclosed in quotation marks.
12. Start failover monitoring by using the monitor start command.
Command MONITOR START
Description Initiates failover monitoring
Syntax MONitor START <monitor> [ON <target>]
Options
● monitor—Name of the source machine designated as the
monitor
● target—Name of the target, an IP address on the target, or a
virtual IP address
Examples
● monitor start alpha on beta
● mon start alpha
Notes
Option names that contain non-alphanumeric characters must be
enclosed in quotation marks.